-
Thermoelectric aircooling module
  This New technology make use of thermoelectric couple for Air conditioning in automobile and also for home utilization.
  In this method it use reverse simpson effect. In simpson effect when two different metals are at different temperature it will produce electromative force which give voltage difference. In this reverse simpson method when voltage is supplied to thermocouple it will produce cooling effect on one side and on other side it will prduce heat. Heare on cold side heat sink are attached which absorb heat from incoming air and it will cold the air which is used for airconditioning.

Advantage:
-We can use this method in automobile and in this method we does not require compressor which consume 10% power of engine so by this we can increase milage of engine.
-In this method we do not require CFC which is very harmful to atnosphere and ozone layer
-Not much mechanical part due to this less problem of maintenance and noise.

This method is not adopted because the efficiency of thermoelectric couple is not much hire but due to research it can be increased and due to the current trend of electric car this technology will be great of use.

Comments

Post a Comment

Popular posts from this blog

How do trains turn without differential

-
Image
    How do trains turn without          differential? This is a question that would baffle many. It surely baffled us and we thought the flanges on the wheels keep the trains on the track, but that’s not the case at all. Then what could it be? Let’s try to address that exactly. If you notice the shape of the wheel of a train, you will notice that they are conical in shape. The side with greater diameter is on the inside. The shorter diameter lies towards outside.When the train approaches a curve and has to turn then the wheels slide away in the correct direction. This keeps the train on the track and allows for proper negotiation of the curve.      In studying this theory we are considering that the train is moving in the left direction.Now if the train is making a left turn. Then the wheels due to centrifugal force will move towards the right. Obviously, this will result in an increase in diameter of the right w...
Read more
-
Image
3D Printing After revolutionizing the world of product design, 3D printing is now making waves in the manufacturing industry. The ability to design and create virtually anything using metal, plastic, even  human tissue will obviously change the way we build... everything. Also known as additive manufacturing, 3D printing brings a mixed bag of benefits that make it worth the investment: ●Drastically reduce design-to-production times ●Drastically reduce manufacturing lead times ●Easier to produce individual and small lot products from machine parts to prototypes ●Greater flexibility in production ●Less waste/more cost effective And the best part is 3D printing is still new. It’s only going to get better in the upcoming months and years which makes now the perfect time to start incorporating it.
Read more
-
Image
SpaceX falcon Multi-stage space rockets are a bittersweet affair: One minute, they’re sitting on the launch pad, shiny, expensive, and awaiting an explosion-fueled climb. They next, they’re dropping back to Earth in pieces, unceremoniously plopping in the ocean, and sent off to the scrap heap for good. Not anymore. In March, SpaceX launched a “used” Falcon 9 first stage, an unprecedented achievement in spaceflight. It was a milestone for the company, which designed the Falcon’s first stage to land upright—and intact—back on Earth after every launch. Perhaps more importantly, it proved SpaceX’s concept valid. Rockets cost tens of millions or even hundreds of millions of dollars to build. Being able to reuse them could significantly reduce the cost of spaceflight. That may pave the way for all manner of aerospace innovations.
Read more